Bilt Hamber Re-View (Glass Polish)

RE-VIEW is a powerful active polish, it effectively strips any glass contaminating films, water repellent coatings, hard water marks and mineral staining. Unlike other glass polishes RE-VIEW will remove these films even when used by hand. Machine use is also possible.
Size: 500ml   Directions: SHAKE WELL BEFORE USE.

• Treat only cool glass surfaces, out of direct sunlight. Clean glass of loose particulate dirt.
• For every 30cm square of glass use approximately one pea-sized amount applied by a damp, soft cotton cloth or suede microfibre, work well into glass using small circular motions.
• Mist lightly with water occasionally if machine polishing or if treating larger areas of glass.
• Residue may be rinsed when still wet, or buffed easily away with a dry microfibre cloth once FULLY dried.
• Test that glass does not repel water on completion by atomising water onto the cleaned area. Fully cleaned and decontaminated glass will show a flat uniform film of water.
• Wipe dry after test.

Precautions:

• Apply only on glass surfaces. Do not use on aftermarket or plastic tinted windows. Test at small scale on unusual glass finishes. Do not use on textured glass.
• Store in cool conditions away from direct sunlight and do not allow to freeze.